General Information
The Workshops Chairs of GECCO 2027 invite domain experts to submit proposals for organizing a workshop at GECCO 2027. The proposal deadline is November 24, 2026 (Anywhere on Earth).
Workshops at GECCO provide an opportunity to develop common visions and exchange ideas in an informal setting, especially if focused on emerging or interdisciplinary research areas. In contrast to regular paper sessions, workshops should host interactive activities (discussions, demonstrations, collaborations, sprints, etc.).
Workshop organizers are responsible for coordination and publicity. If paper submissions are invited for the workshop (this is not a requirement!), workshop organizers take care of the review process, under the supervision of the GECCO 2027 workshop chairs. If applicable, workshop organizers also provide a list of additional (invited) speakers and titles of talks.
Note that organizers, participants and presenters must register for the conference.
At least one organizer of each workshop should attend the conference in person. Attendance at the workshops is free to all GECCO attendees.
Accepted workshop papers (for workshops which include a peer-reviewed paper submission process) will be published as part of a Companion volume to the conference proceedings in the ACM Digital library.
Important Changes for 2027
For GECCO 2027 Workshops there are several important changes in rules and in emphasis:
- GECCO 2027 is on-site only.
- A typical workshop is one session in length.
- A workshop is expected to involve interactive elements, taking advantage of the workshop format, not simply a paper session.
- A workshop need not involve a paper submission process.
- A typical workshop will have 1-2 organizers, and larger numbers may require justification.
- The ACM APC still applies to accepted full-length workshop papers, but not to Abstracts (1-2 pages), Extended Abstracts (1-4 pages), or Tutorials; but the subsidy has changed for 2027 relative to 2026, as detailed later in this call.
Workshop Proposal Submission
Workshop Proposals are submitted using a form in the GECCO 2027 web page (see below). Submitters should be prepared to provide the following information:
Submitters should be prepared to provide the following information:
- The workshop Title and Acronym (or short title). Please refrain from using special characters in the title.
- Submission Type. Workshop organizers must choose one of the following options for the types of submissions. Organizers must decide and be aware of the implications for authors that participate in their workshop.
- Full papers (8 pages + references) - Author must cover the ACM Open APC (see below for more information).
- Extended Abstracts (4 pages) - No APC required. An Extended Abstract provides a summary of a work-in-progress, typically just enough for readers to understand the idea, scope, and potential impact. Often lacks full methodology, detailed results, or extensive references.
- Both types of submissions. Workshop organizers may decide to allow for both types of submissions.
- Neither.
- A description of scope and content. Those fields will be displayed on the website as the default description for the workshop if it is accepted.
- The name, affiliation, email and short bio of the organizer(s). The first organizer will be the default contact person, but more organizers can be designated as contact persons. A typical workshop will have 1-2 organizers and larger numbers may require justification.
- (Optional) A URL with more info about the workshop.
- The expected number of participants in the workshop.
- Whether the organizers plan to invite speakers (beyond the submitters of accepted papers) to the workshop.
- A description of the interactive activities or demonstrations planned within the workshop (or, if none, a justification for why it should be considered to be a workshop).
- The estimated duration (typically 1 session; exceptionally 2 or even 3 sessions if approved by the GECCO organizers) and type of sessions, e.g. the expected presentation formats (invited, submitted), interactive elements, etc. One session lasts 110 minutes.
- (Optional) If this workshop (or a similar event coordinated by the same organizers or a subset of them) has taken place in previous years, either at GECCO or at other events, please include URLs to the event pages, and a description of how the GECCO 2027 event differs.
- (Optional) Any plans for publication of workshop output artifacts (other than peer-reviewed papers, where relevant), e.g. on the workshop’s own web page.
- (Optional) Any other relevant information to help evaluate the workshop proposal.
Please log in to submit a proposal
- If you already have an account on this site, you need to log in. Please note that your user name is your email address. If you have an account from 2025, this account has been migrated.
- If you don't have an account, you need to register a new account.
- A passcode is required, enter 'Muj&0&9S' (without the quotes).
- Confirm your email address and log in to the site.
Reviewing of Proposals
Workshop proposals will be reviewed by the Workshop Chairs, General Chair and EiC, and other members of the GECCO 2027 organizing committee, based on GECCO attendees' likely interest, the breadth and the depth of the topic(s), the number of total submissions, and the expertise and credentials of the organizer(s). After submitting a proposal you can view it via the My Info page.
Timeline
- Proposals for workshops: November 24, 2026 (Anywhere on Earth)
- Acceptance decision: December 22, 2026 (Anywhere on Earth)
- Submission opening: Approx February - to be confirmed
- Submission deadline: Approx April - to be confirmed
- Notification: Approx April - to be confirmed
- Camera-ready: Approx May - to be confirmed
- Author's mandatory registration: Approx May - to be confirmed
- GECCO Workshops July 12-13th, 2027
- GECCO Conference July 12-16th, 2027
ACM's New Open Access Publishing Model for 2027
All ACM publications, including those from ACM-sponsored conferences, are 100% Open Access. Authors have two primary options for publishing Open Access articles with ACM: the ACM Open institutional model or by paying Article Processing Charges (APCs). With ~3,000 institutions already part of ACM Open, the majority of ACM-sponsored conference papers will not require APCs from authors or conferences (currently, around 76%.
Authors from institutions not participating in ACM Open will need to pay an APC to publish their papers, unless they qualify for a financial or discretionary waiver. To find out whether an APC applies to your article, please consult the list of participating institutions in ACM Open and review the APC Waivers and Discounts Policy. Please keep in mind that waivers are rare and are granted based on specific criteria set by ACM.
To support authors and institutions as they continue to adapt to ACM’s Open Access publishing model, the ACM Council has approved subsidized APC rates for calendar year 2027 allowing more time for institutions to join ACM Open. The subsidy will offer:
- $500 APC for ACM/SIG members
- $750 for non-members
This represents a 29% discount off current APC list pricing, funded directly by ACM. Authors are encouraged to help advocate for their institutions to join ACM Open during this transition period.
This temporary subsidized pricing will apply to all conferences scheduled for 2027.
ACM and GECCO Authorship and Peer Review Policies on Generative AI (Updated)
GECCO follows official ACM policies regarding Generative AI tools. We encourage authors who choose to use LLMs, agents and other AI technologies and tools to do so responsibly, as an assistive rather than substitutive tool for human insight, hypothesis generation, implementation, analysis or documentation.
- Any use of AI tools to support the execution of the research (including, e.g., the implementation of code, design and analysis of experiments, generation of results, or any other aspects of the research lifecycle that are directly relevant to the conclusions of the research underlying the work) must be **disclosed and described in detail** in the **Methods** (or equivalent) section of the manuscript. This includes the creation of any artifacts that are directly relevant to the conclusions of the research, such as code, datasets, and charts or figures that rely on the AI tools.
- Use of AI tools to support the writing of a submission should be explicitly mentioned in the **Acknowledgments** section, including the name of the tool and a short description of how it was used. As mentioned earlier, we encourage authors to use such tools responsibly, to assist rather than substitute human writing.
- Generative AI / LLM tools cannot be listed as authors. **All named authors** remain fully responsible for the entire content of the paper, including all text, figures, and references. Therefore, while authors are welcome to use any tool they wish to support the preparation and writing of the paper, they must ensure that all content is correct and original. It is the authors’ responsibility to verify the tools are used in a scientifically responsible manner.
- Wholesale generation of text (as opposed to using AI to support and refine writing) is not allowed - particularly, but not exclusively, in the related works / state of the art / literature review sections - and could result in desk rejection if detected. For instance, the detection of hallucinated or misused references (i.e., references that do not relate to the statement for which they are being cited) may result in summary desk rejection.
- Any attempt at prompt injection is strictly forbidden and will result in desk rejection.
- In accordance with ACM's Peer Review policy, reviewers must not upload or share submitted manuscripts or review materials with generative AI systems. Reviewers may use generative AI tools with the sole purpose of improving the quality and readability of their own reviewer reports intended for the authors. More details on the reviewer policies will be made available at a later date.
Submission of Code (New)
This year we plan to pilot an initiative for greater transparency and reproducibility of manuscripts submitted to GECCO. While the details of this initiative will be communicated later, we would like to draw the attention of authors to our plan that all papers (including workshop papers) for which code is a central aspect of the reported results will be expected to be accompanied by runnable code that could reproduce the manuscript’s main results for the peer-review process. The code will only be accessed by authorised organisers for the sole purpose of verifying reproducibility. The presentation of the code or the level of commenting will not be inspected.
More Information and Contact
For questions regarding the workshops at GECCO 2027, please contact the Workshops Chairs:
James McDermott
University of Galway, Ireland
Email: james.mcdermott (at) universityofgalway.ie
J. Ignacio Hidalgo
Universidad Complutense de Madrid, Spain
Email: hidalgo (at) ucm.es
If you encounter issues or have questions about the Workshop Proposal submission process on the GECCO website, please contact the Digital Media Co-Chairs
Hirad Assimi
Email: assimi.hirad (at) gmail.com
Marcella Scoczynski Ribeiro Martins
Federal University of Technology - Parana UTFPR, Brazil
Email: marcella (at) utfpr.edu.br